Patent Amorphous Powders for HVAF or HVOF Thermal Spraying Replacing Hard Chrome Plating
- Brand :AdvancedMetal
- Sizes:5-30 um, 10-45 um etc.
After spraying NanoX in low heat input and rapid cooling, the Coating has mainly Amorphous and excellent corrosion resist, high hardness and wear resist, good bonding. The high melting particles in NanoX can carry on the powder forging to reduce the pull stress. The max dense coating thickness can be above 0.6mm, no crack, normally no need sealing.
Patent Amorphous Powders for HVAF or HVOF
Thermal Spraying Replacing Hard Chrome Plating
1. Patent NanoX Powder Description
AdvancedMetal patent NanoX Gas Atomized Powder is of uniform amorphous microstructure, especially in the sizes 8-25um,
15-53um etc. After metal thermal spraying in low heat input and rapid cooling, the feature of Coating can still maintain mainly
amorphous microstructure, which has excellent corrosion resistance, high hardness and wear resistance, good bonding strength
as Liquidmetal or Nanosteel. Application temperature is under 400 °C.
The coating from traditional thermal spray is of pull stress, thus easy to crack resulting from the metal cooling shrinkage and the
max. coating thickness is about 0.3mm. The high melting particles in AdvancedMetal patent NanoX Gas Atomized Powder can carry
on the powder forging on the cooled layer to reduce the pull stress or even form the press stress, thus not easy to crack and the
max. dense coating thickness can be much bigger about 0.6mm than Nanosteel or Liquidmetal. The coating of thickness over 200um
is normally no need sealing.
2. Coating and Powder Characters
Excellent Corrosion Resistance
The corrosion resistance of NanoX dense metal Amorphous coating is superior to 316L.
Superior Wear Resistance
The wear resistance of AdvancedMetal NanoX Amorphous coating is very good for amorphous microstructure,
which hardness is about HV700-900.
Low Oxygen and Superior Flowability
The oxygen content, superior sphericity and flowability of AdvancedMetal patent NanoX Amorphous Gas Atomized
Metal Spray Powder are very good.
Lower price and highly yield
The cost is very competitive than Nanosteel or Liquidmetal because of the increased yield.
Suitable for the wear and severe corrosion resist Long and Big diameter Rolls, Rods and Tubes of multi layers HVAF or HVOF metal
thermal spray replacing the industrial hard chrome plating as follows:
HVAF or HVOF Thermal Spraying Industrial Roll Hollow Piston Rod
3.1.2 Not suitable for small areaor complex parts.
3.2 Suitable Guns for powder size 8-25um: All HVAF guns result in higher coating hardness, higher deposition rate, higher efficiency,
lower cost than HVOF. HVOF guns of Axial or Centre Direction powder feeding.
Suitable Guns for powder size 15-53um: HVOF guns of Radial or Vertical Direction powder feeding.
3.3 Process suggestion: Short Barrel. Long Spray Distance. Low Flame Temperature. Each pass thickness maximum 8um. Pressure air or
Dry ice for rapid cooling.
The standard packaging is by vacuum bag per 10 kg. We can do according to the customer requirements for packaging.
Patents Every Year
Please send your inquiry to us by email about our Patent Amorphous HVAF or HVOF Spraying Powders for Replacing Chrome Plating especially for tube or pipe inside coating, Patent Nickel Alloy powder more wear resist than Hastelloy and Inconel of severe corrosion and abrasion resist for Laser Deposit and PTA welding cladding and Plasma surfacing or overlay, Tungsten Carbide Hardmetal Cemented Quick Assembly Clad Wear Plates for Crushing Liner and Excavator and Auger tips and Brick Mold or Mould, PDC Cutter Diffusion Bonding, PDC Diamond Bearing and Brazing etc.